If an old pumping station is nearing the end of its life cycle, there are usually three options:

1. Let's replace the entire pumping station.
If the well is large, a new, smaller pump station can be dropped inside the old well. Otherwise, the old well must be excavated and a new one installed in its place. Depending on the location and the pump station, this is usually a one-day operation in most cases..  

2. The pump station machinery and piping will be replaced.
Jos kaivo itsessään on vielä hyvässä kunnossa, mutta kaikki muu on tullut elinkaarensa loppuun, rakennetaan käsityönä uusi jalusta, putkisto, kiskot ja pumppu. Näin saadaan luotettavuus uuden tasolle eikä piha-aluetta tarvitse repiä auki.
Tämä on edullisempi ja helpompi vaihtoehto etenkin puutarhoissa tai pihoilla, joissa kasvusto voi kärsiä tai joissa on kallis asfaltointi.   

3. Vaihdetaan pumppu.
Kaikkein helpoin ja edullisin vaihtoehto. Tämä edellyttää, että muu pumppaamon laitteisto on kunnossa.

Improper installation can be costly. Incorrectly installed risers can cause flooding in basements or drains. Poorly executed logic or well installation can damage the pump and its controls. These are expensive mistakes that can be avoided by obtaining commissioning from us..  

We will conduct a thorough implementation for the pumping station

We install, adjust, and test the lifts, pump, and control system. We also provide a protocol for the commissioning.. 

We check installations made by others in disputes and liability issues. It is generally advisable for the well owner to seek an outside opinion. We often notice installation errors that allow for the warranty repair of a relatively new pump. By using an inspection service, one can ensure that pumps do not need to be replaced every two years..